NEC RULES QUESTIONS
Post your questions here.I have a rules question for the HOST rules. Can I reinforce/replace the guide holder on a GT car? I've seen people break a chassis at every one of these events. Most of the...
View ArticleRe: NEC RULES QUESTIONS
Dickie, If you used a strong glue, it may work. The epoxy on my brass is an overkill but I didn't want to take any chances. Wayne did his in plastic for the RAA and it broke.If someone really has a...
View ArticleRe: NEC RULES QUESTIONS
MikeI found that 3/16 tubing works great. What I did was drill out the existing guide hole with a 3/16 drill bit, by hand no motor needed it's only plastic. GO slow and easy...Then I cut the rear half...
View ArticleRe: NEC RULES QUESTIONS
Note to anyone who wants a replacement Chassis forSlot iT 956/962The New Slot iT anglewinder is availableand appears that it can be setup as a sidewinder or inline.There are 2 plastic filler peices...
View ArticleRe: NEC RULES QUESTIONS
Mike, Have you found that the fishing line has kept the guide from breaking? I understand the brass tubing is an after the break fix.
View ArticleRe: NEC RULES QUESTIONS
Quote:Does the Hi tail 956 uses the same chassis as the 956 ?No, it does not unfortunately. So don't go breaking the chassis in your Jagermeister just yet...
View ArticleRe: NEC RULES QUESTIONS
Quote:Mike, Have you found that the fishing line has kept the guide from breaking? I understand the brass tubing is an after the break fix. I only ran it during the last NEEC race in the orange 956...
View ArticleRe: NEC RULES QUESTIONS
Quote:Reinforcing this area does not improve performance, it only eliminates known failures. Quote:The guide post on the Slot.it chassis is a known "Achilles Heel". We've all seen (or experienced...
View ArticleRe: NEC RULES QUESTIONS
Quote:I know of one online board (S.C.I.) that Mike and Steve post on, have you guys ever gone on the Slot It forum & news part and asked if Mr. Slot It is aware of this problem? Norman, I'm...
View ArticleRe: NEC RULES QUESTIONS
I noticed that there is some slop using the 3/16" tubing, like Mike said, is this a problem? drag or whatever? 5/32" tubing is too small. No other brass tubing available. Probably need 11/64" to get...
View ArticleRe: NEC RULES QUESTIONS
I would recommend using Slot It screw in flag (guide) part # sich 07 or sich 10. They come with a screw and washer that hold it in rather than the stock push in type. I use them and have never had a...
View ArticleRe: NEC RULES QUESTIONS
For the last time fantasy world has chassis for the 962 , 956, and 956kh the hightail!!!!!!!!!!! you boneheads!!!!!!!!!!!!! Steve
View ArticleRe: NEC RULES QUESTIONS
There is one at the end of the list of chassies(SICS09T-AW)that says it is for an anglewinder conversition but it says that it motor mounts for inline or sidewinder motor pod. Where it is listed as an...
View ArticleRe: NEC RULES QUESTIONS
George, that chassis is legal for the NEC, future NEEC's, and HOST events using any of the configurations (inline, sidewinder or anglewinder).As for WNR, it will only be legal if you use the inline...
View ArticleRe: NEC RULES QUESTIONS
As for the guidepost, we did discuss this at length at yesterday's race. We were able to reach a decision, but since then I've raised a question, so I am waiting for a reply from the others before...
View ArticleRe: NEC RULES QUESTIONS
George, yep thats chassis you need, and didnt mean to call you a bonehead, but it concerns me if you hang out with those Host and WNR guys long enough, well you just might become one!!!!!!!!! You have...
View ArticleRe: NEC RULES QUESTIONS
Quote:and didnt mean to call you a bonehead, but it concerns me if you hang out with those Host and WNR guys long enough, well you just might become one!!!!!!!!! You have been warned!!!!!!That coming...
View ArticleRe: NEC RULES QUESTIONS
Now lets get something straight , I was a bonehead , long before i met you guys!!!!!!!!
View ArticleRe: NEC RULES QUESTIONS
Bonehead is one of the nicest things I've been called lately.George
View ArticleRe: NEC RULES QUESTIONS
A Question regarding HOST rules for GT class. Would a car that comes equipped with some sort of suspension in its stock form be legal? I'm thinking of the new Avant Audi that has some spring steel...
View ArticleRe: NEC RULES QUESTIONS
A good question Brian...I know some of our guys have played with Slot.It's suspension system for a bit a year or 2 ago, and they weren't outlawed back then. I'll bring this up to the others (via...
View Article
